采用FTIR和电子能谱EDS指纹图谱直观比对鉴定右归丸济生肾气丸

结合FTIR和电子能谱EDS指纹图谱,鉴别了两种组成相近的中药复方右归丸和济生肾气丸.测定右归丸和济生肾气丸样品氯仿提取物的红外指纹图谱,依据W检验理论判别方法精细建立两种中药复方红外指纹图谱的特征吸收峰组,确定了各个特征吸收峰相对应的特征分子基团和药物成分组成.同时测量两种中药复方原药粉末样品的EDS指纹图谱.根据两...     

铕与4-(4-吡啶甲酰基)苯甲酸配合物的合成与荧光性能研究

以Eu3+为中心离子,4-(4-吡啶甲酰基)苯甲酸(HPFBA)、1,10-菲罗啉(Phen)和三苯基氧膦(TPPO)为配体,合成了新型配合物Eu(PFBA)3(H2O)4,Eu(PFBA)3Phen(H2O)3和Eu(PFBA)3TPPO(H2O)3(PFBA=4-(4-吡啶甲酰基)苯甲酸根).红外光谱表明,形成配合...     

可见/近红外光谱分析技术快速鉴别航天育种番茄

提出了利用可见/近红外光谱技术快速无损鉴别航天育种番茄品种的方法,采用偏最小二乘法对光谱特征信息进行提取,与神经网络结合建立番茄品种的鉴别模型.该模型将提取后的主成分作为神经网络的输入,加速了神经网络的训练速度.同时采用小波变换对大量光谱数据进行压缩,并结合神经网络建立番茄品种鉴别模型,该模型将压缩后的数据作为神经网络...     

不同组分的钒酸盐混晶Ybt:YxGd1-t-xVO4光谱与激光性质的比较研究

研究了三种掺Yb钒酸盐混晶Yb_0.005:Y_0.298Gd_0.697VO₄, Yb_0.007:Y_0.407Gd_0.586VO₄和Yb_0.009:Y_0.575Gd_0.416VO₄的室温偏振吸收谱和发射谱. 结果表明,最强的吸收和发射相应于π偏振,位 关键词： 掺Yb钒酸盐混晶 吸收谱和发射谱 激光振荡 偏振态     

具有横向磁晶各向异性的钴纳米线的微波吸收性能

使用电化学脉冲沉积法制备了磁晶各向异性易磁化方向(c轴)垂直纳米线长轴方向的钴纳米线.受到磁晶各向异性、静磁相互作用等因素与形状各向异性相互竞争的结果,纳米线阵列的磁滞回线显示出较弱的磁各向异性.此外,在2—18 GHz频率范围内,纳米线/石蜡复合材料的介电色散谱的虚部在5 GHz处有一个主峰,在10 GHz附近有一个较弱的峰;德拜弛豫特性和材料的电导率对这两个峰的形成均有贡献.同时,其磁导率色散谱的虚部在频率为6.1 GHz处有一个主峰,在10 GHz以上有两个较微弱的峰. 前一个峰源于自 关键词： 钴纳米线 介电色散谱 磁导率色散谱 微波吸收剂     

激波诱导下纳米铝粉与微米铝粉的爆炸特征对比研究

对比研究了入射激波诱导下纳米铝粉和微米铝粉与环氧丙烷混合物快速反应系统中的爆炸特征.利用多台单色谱仪同步采集技术实验测定了二种反应混合物在不同诱导激波中强度作用下的点火延迟时间.为获得爆炸系统内部信息利用扫描电子显微镜(SEM),X射线衍射分析仪(XRD),X射线能谱(XPS)对相应铝粉反应生成物的结构、态貌、表面氧化层厚度进行了表征和分析.结果表明:TEM结果表明纳米铝粉生成物为絮状、针状和纤维状,而微米铝粉生成物为球状且体积增大;XRD结果显示在压缩区、点火区、燃烧区、爆炸区、传播区、碎片压缩致冷区生 关键词： 诱导激波 点火 XPS能谱 铝粉     

掺Bi钨酸镉单晶体发光特性的研究

用坩埚下降法(Bridgman)生长出了Bi离子掺杂的CdWO₄单晶.测定了晶体不同部位的吸收光谱、发射光谱和X射线电子能谱(XPS).Bi离子的掺入引起CdWO₄晶体的吸收边从345 nm红移到399 nm.在311 nm, 373 nm,808 nm和980 nm光的激发下,分别观测到中心波长为470 nm,528 nm,1078 nm和较弱的1504 nm四个不同发射带.Bi:CdWO₄单晶的XPS谱分别与Bi₂ 关键词： Bi离子 荧光光谱 X射线电子能谱 4单晶')" href="#">CdWO₄单晶     

Effect of the chemistry and structure of the native oxide surface film on the corrosion properties of commercial AZ31 and AZ61 alloys

The purpose of this study has been to advance in knowledge of the chemical composition, structure and thickness of the thin native oxide film formed spontaneously in contact with the laboratory atmosphere on the surface of freshly polished commercial AZ31 and AZ61 alloys with a view to furthering the understanding of protection mechanisms. For comparative purposes, and to more fully describe the behaviour of the native oxide film, the external oxide films formed as a result of the manufacturing process (as-received condition) have been characterised. The technique applied in this research to study the thin oxide films (thickness of just a few nanometres) present on the surface of the alloys has basically been XPS (X-ray photoelectron spectroscopy) in combination with ion sputtering. Corrosion properties of the alloys were studied in 0.6 M NaCl by measuring charge transfer resistance values, which are deduced from EIS (electrochemical impedance spectroscopy) measurements after 1 h of exposure. Alloy AZ61 generally showed better corrosion resistance than AZ31, and the freshly polished alloys showed better corrosion resistance than the alloys in as-received condition. This is attributed to a combination of (1) higher thickness of the native oxide film on the AZ61 alloy and (2) greater uniformity of the oxide film in the polished condition. The formation of an additional oxide layer composed by a mixture of spinel (MgAl₂O₄) and MgO seems to diminish the protective properties of the passive layer on the surface of the alloys in as-received condition.     

Role of cleaning methods on bond quality of Ti coated glass/imidex system

Thin film materials are widely used in the fabrication of semiconductor microelectronic devices. In thin film deposition, cleanliness of substrate surface have become critically important as over 50% of yield losses in integrated circuit fabrication are caused by microcontamination [1]. There are many wafer cleaning techniques. The most successful approach for silicon wafer cleaning technique is RCA clean [2]. But for glass substrate it is still not known which procedure of cleaning is the best. This paper provides an understanding of the right way of glass wafer cleaning method, with a focus towards identifying good bond strength. Two wafer cleaning techniques have been used for cleaning glass substrates in the context of laser micro-joining of dissimilar substrates. First cleaning procedure involves two steps, first cleaning in acetone solution and then in DI water solution. After each step dried with N₂. Second cleaning procedure involves four steps, first cleaning with 1% Alconox solution, second in DI water, third in acetone solution and finally in a methanol solution and dried with N₂ after each step. Deposition of Ti thin film on top of these two types of substrate using DC magnetron sputtering method also showed better adhesion of Ti film on glass for the second type of cleaning method. Scanning electron microscopy (SEM) analyses of the lap shear tested failed surfaces for these two kinds of samples revealed strong bond for samples prepared by second cleaning method compared to first cleaning method. Characterization of these two sets of samples using X-ray photoelectron spectroscopy (XPS) has shown excellent contamination removal for the second cleaning method. This modification is believed to be due to reduction of carbon contamination.     

XPS study of protein adsorption onto nanocrystalline aluminosilicate microparticles

X-ray photoelectron spectroscopy (XPS) was used to study the interaction of two different sized proteins, bovine serum albumin (BSA) and fibrinogen, with an aluminosilicate system containing yttrium and iron that is a potential biomaterial. Serum albumin and fibrinogen are two major plasma proteins and the most relevant proteins adsorbed on the surface of biomaterials in blood contact.The aluminosilicate samples were incubated for several exposure times, up to 24 h, in simulated body fluid enriched with BSA, and in buffered fibrinogen solution. Time dependence of proteins adsorption onto surface of the investigated samples is reflected by the evolution of the new N 1s photoelectron peak and by the modification of C 1s core-level spectra recorded from the samples immersed in protein solution.